install.sh

#!/usr/bin/env bash
set -uo pipefail

# =============================================================================
# CLI Maxxing — Install
# Runs all non-interactive steps in order. Steps that are already installed
# are skipped automatically. Steps that require interactive input (Step 5,
# Step 6, and Step 7) are noted at the end — run them separately in your terminal.
# Usage: bash <(curl -fsSL https://raw.githubusercontent.com/fidgetcoding/cli-maxxing/main/install.sh)
# =============================================================================

RED='\033[0;31m'
GREEN='\033[0;32m'
YELLOW='\033[1;33m'
BLUE='\033[0;34m'
NC='\033[0m'

BASE_URL="https://raw.githubusercontent.com/fidgetcoding/cli-maxxing/main"

# -----------------------------------------------------------------------------
# reload_path — re-source brew + nvm into the current shell so chained child
# steps in this pipeline can find node, npm, brew, etc. Needed because Step 1
# installs brew/nvm mid-run and the parent shell otherwise never picks them up.
# -----------------------------------------------------------------------------
reload_path() {
  # brew — first found wins
  local brew_bin
  for brew_bin in /opt/homebrew/bin/brew /usr/local/bin/brew /home/linuxbrew/.linuxbrew/bin/brew; do
    if [ -x "$brew_bin" ]; then
      eval "$("$brew_bin" shellenv)"
      break
    fi
  done

  # nvm — source if installed
  export NVM_DIR="$HOME/.nvm"
  # shellcheck disable=SC1091
  [ -s "$NVM_DIR/nvm.sh" ] && . "$NVM_DIR/nvm.sh"

  # ~/.local/bin — prepend idempotently
  case ":$PATH:" in
    *":$HOME/.local/bin:"*) : ;;
    *) export PATH="$HOME/.local/bin:$PATH" ;;
  esac
}

# Breadcrumb dir — child step scripts touch step-N.done here on success.
mkdir -p "$HOME/.cli-maxxing"

echo ""
echo -e "${BLUE}━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━${NC}"
echo -e "${BLUE}  CLI Maxxing — Install${NC}"
echo -e "${BLUE}  Homebrew · Git · Node.js · Claude Code · FidgetFlo${NC}"
echo -e "${BLUE}  Ghostty · Arc · Dev Tools · Safety Check · Status Line${NC}"
echo -e "${BLUE}  Running all steps in order, skipping what's already done${NC}"
echo -e "${BLUE}━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━${NC}"
echo ""

# Subscription gate — before any downloads. The CLI is free; Claude itself
# requires a paid claude.ai plan. No plan = the whole install is wasted time,
# so catch it upfront instead of after 20 min of brew + MCP downloads.
echo -e "${YELLOW}━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━${NC}"
echo -e "${YELLOW}  IMPORTANT — Claude subscription required${NC}"
echo -e "${YELLOW}━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━${NC}"
echo ""
echo "  This installer sets up Claude Code (the terminal CLI) for free,"
echo "  but USING Claude requires a paid claude.ai plan. No plan = the"
echo "  rest of this install is wasted time."
echo ""
echo -e "  No plan yet?  Sign up:  ${GREEN}https://claude.ai/${NC}"
echo "    • Claude Pro is the minimum tier (\$20/mo)"
echo "    • Max plan recommended for heavy use"
echo ""
echo -e "  Already subscribed?  ${GREEN}Press Enter${NC} to continue."
echo -e "  Need to sign up first?  ${GREEN}Press Ctrl+C${NC}, come back after."
echo ""
if [ -t 0 ]; then
    # shellcheck disable=SC2162
    read -p "  Press Enter to continue... " _CLAUDE_SUB_CONFIRM || true
else
    echo -e "${YELLOW}  [non-interactive mode — continuing. Make sure you have a plan.]${NC}"
fi
echo ""

# Step 1 — CLI Tools
echo -e "${YELLOW}>>> Step 1 — CLI Tools${NC}"
echo ""
curl -fsSL "$BASE_URL/step-1/step-1-install.sh" | bash
# BUG A fix: Step 1 installs brew+nvm; re-source them into this shell so the
# remaining curl|bash steps (2/3/4/7/8/final) can actually find them.
reload_path

# Hard gate: if claude didn't land, stop everything. Every downstream step
# configures Claude integrations — pointless without claude actually working.
if ! command -v claude &>/dev/null || ! claude --version &>/dev/null; then
    echo ""
    echo -e "${RED}━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━${NC}"
    echo -e "${RED}  CRITICAL — Claude Code did not install${NC}"
    echo -e "${RED}━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━${NC}"
    echo ""
    echo "  Step 1 finished but 'claude --version' does not work. Without"
    echo "  claude on PATH, the remaining steps can't configure anything"
    echo "  useful — stopping here."
    echo ""
    echo "  Most common causes + fixes:"
    echo "    1. Fresh terminal needed — close this window, open a new one,"
    echo "       run 'claude --version'. If it works, re-run this installer."
    echo "    2. npm registry blocked — check internet; try again."
    echo "    3. Old Node.js — 'node -v' should report v18 or higher."
    echo ""
    echo "  Fix one of the above, then re-run:"
    echo -e "    ${GREEN}bash <(curl -fsSL https://raw.githubusercontent.com/fidgetcoding/cli-maxxing/main/install.sh)${NC}"
    echo ""
    exit 1
fi
echo ""

# Step 2 — Bonus Software (Ghostty + Arc)
echo -e "${YELLOW}>>> Step 2 — Bonus Software${NC}"
echo ""
curl -fsSL "$BASE_URL/step-2/step-2-install.sh" | bash
echo ""

# Step 3 — Developer & Utility Tools
echo -e "${YELLOW}>>> Step 3 — Developer & Utility Tools${NC}"
echo ""
curl -fsSL "$BASE_URL/step-3/step-3-install.sh" | bash
echo ""

# Step 4 — FidgetFlo
echo -e "${YELLOW}>>> Step 4 — FidgetFlo${NC}"
echo ""
curl -fsSL "$BASE_URL/step-4/step-4-install.sh" | bash
echo ""

# Step 8 — Safety Check
echo -e "${YELLOW}>>> Step 8 — Safety Check${NC}"
echo ""
curl -fsSL "$BASE_URL/step-8/step-8-install.sh" | bash
echo ""

# Final Step — Status Line (wrap-up)
echo -e "${YELLOW}>>> Final Step — Status Line${NC}"
echo ""
curl -fsSL "$BASE_URL/step-final/step-final-install.sh" | bash
echo ""

echo ""
echo -e "${GREEN}━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━${NC}"
echo -e "${GREEN}  Core install complete.${NC}"
echo -e "${GREEN}━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━${NC}"
echo ""

# Breadcrumb check — list any expected steps that did NOT touch their .done file.
EXPECTED_CRUMBS=(step-1 ghostty arc step-3 step-4 step-8 step-final)
MISSING_CRUMBS=()
for crumb in "${EXPECTED_CRUMBS[@]}"; do
  if [ ! -f "$HOME/.cli-maxxing/${crumb}.done" ]; then
    MISSING_CRUMBS+=("$crumb")
  fi
done

if [ "${#MISSING_CRUMBS[@]}" -gt 0 ]; then
  echo -e "${YELLOW}⚠️  Some steps did not complete. This usually happens on the first install${NC}"
  echo -e "${YELLOW}   when a new terminal hasn't loaded brew + node yet.${NC}"
  echo -e "${YELLOW}   → Close this terminal, open a new one, and re-run:${NC}"
  echo -e "${YELLOW}     bash <(curl -fsSL https://raw.githubusercontent.com/fidgetcoding/cli-maxxing/main/install.sh)${NC}"
  echo -e "${YELLOW}   The script is idempotent and will resume.${NC}"
  echo ""
  echo -e "${YELLOW}   Missing: ${MISSING_CRUMBS[*]}${NC}"
  echo ""
fi

echo "  Available commands: cskip, ctg, cc, ccr, ccc"
echo "  Available skills:   /fswarm, /fmini, /fhive, /w4w, /concise, /bullets, /safetycheck, /gitfix, /recon"
echo "  Swarm tiers:        /fswarm{1,2,3,max}, /fmini{1,2,3,max} — 1=think, 2=think hard, 3=think harder, max=ultrathink"
echo ""
echo "  Three steps require interactive input — run them separately:"
echo ""
echo "    Step 5 (Productivity Tools — Notion, Morgen, n8n, Playwright, etc.):"
echo "    bash <(curl -fsSL https://raw.githubusercontent.com/fidgetcoding/cli-maxxing/main/step-5/step-5-install.sh)"
echo ""
echo "    Step 6 (Telegram — optional, skip if you don't have a bot token):"
echo "    bash <(curl -fsSL https://raw.githubusercontent.com/fidgetcoding/cli-maxxing/main/step-6/step-6-install.sh)"
echo ""
echo "    Step 7 (GitHub — MCP + /gitfix + /recon skills, optional, for devs):"
echo "    bash <(curl -fsSL https://raw.githubusercontent.com/fidgetcoding/cli-maxxing/main/step-7/step-7-install.sh)"
echo ""
echo "  Companion repos (install after this):"
echo "    Design + media:  bash <(curl -fsSL https://raw.githubusercontent.com/fidgetcoding/creativity-maxxing/main/install.sh)"
echo "    Second Brain:    bash <(curl -fsSL https://raw.githubusercontent.com/fidgetcoding/2ndBrain-mogging/main/install.sh)"
echo ""
echo "  Open a new terminal window for aliases to take effect."
echo ""