openaps · psonnera · Jan 4, 2026 · Jan 4, 2026 · Jan 4, 2026 · Jan 4, 2026
diff --git a/docs/EN/DailyLifeWithAaps/AapsScreens.md b/docs/EN/DailyLifeWithAaps/AapsScreens.md
@@ -86,7 +86,7 @@ The blocks in the middle shows:
 
 On the right side, an icon shows the loop status:
 1. Green circle = loop running
-2. Green circle with dotted line = [low glucose suspend (LGS)](#objectives-objective6)
+2. Purple circle with dotted line = [low glucose suspend (LGS)](#objectives-objective6)
 3. Red circle = loop disabled (not working permanently)
 4. Red circle = loop suspended (temporarily paused but basal insulin will be given) - remaining time is shown below icon
 5. Grey circle = pump disconnected (temporarily no insulin dosage at all) - remaining time is shown below icon
@@ -209,22 +209,28 @@ Depending on the pump you use, you may not have all of these icons.
 
 The graph shows your blood glucose (BG) as read from your glucose monitor (CGM).
 
-Notes entered in action tab such as fingerstick calibrations and carbs entries as well as profile switches are shown here.
-
 Use the menu on top left of the graph or long press anywhere on the graph to change the timescale. You can choose between 6, 12, 18 or 24 hours.
 
 The green area reflects your target range.
 
-Blue triangles show [SMB](#Open-APS-features-super-micro-bolus-smb) - if enabled in [Preferences > OpenAPS SMB](#Preferences-openaps-smb-settings).
+This information is also shown on this graph : 
+* Boluses: blue triangle on the BG curve and insulin amount
+* Carbs entries: orange triangle on the BG curve and carb amount
+* Target as defined in the profile or modified by temporary target: green line
+* Profile switches: star at the top of the graph
+* Loop status: color line at the top of the graph when the status is anything else than closed loop - see [Loop status](#AapsScreens-loop-status) for the colors
+* [SMB](#Open-APS-features-super-micro-bolus-smb) - if enabled in [Preferences > OpenAPS SMB](#Preferences-openaps-smb-settings): blue triangles at the bottom of the graph
 
 (AapsScreens-activate-optional-information)=
 #### Activate optional information
 
-On the main graph, you can switch on these optional information:
-* Predictions
-* Treatments
+Using the top right arrow, you can switch on these optional information:
+* Predictions (see below)
+* Treatments : notes entered in action tab: grey, orange or red dot depending on the severity, as well as fingerstick calibrations: red dot
 * Basals
-* Activity - insulin activity curve
+  * As defined in the profile: blue dotted line at the bottom of the graph
+  * Actually delivered basal: blue plain line with blue background
+* Activity - insulin activity curve: yellow line
 
 To show this information, click the triangle on the right side of the main graph. For the main graph just the four options above the line "Graph   1 2 3 4" are available.
 
@@ -640,6 +646,7 @@ In this view, you can view and alter the history of the following treatments:
 * [Temporary target](../DailyLifeWithAaps/TempTargets.md)
 * [Profile switch](../DailyLifeWithAaps/ProfileSwitch-ProfilePercentage.md)
 * Careportal: notes entered through action tab and notes in dialogues
+* Running mode : history of loop status
 * User entry: other notes that are not sent to Nightscout
 
 In the last column, the data source for each line is displayed in blue. It can be :
@@ -702,6 +709,13 @@ Deleting the entries only affects your reports in Nightscout and will never actu
 
 You can use the **Clone** button shown on line **1** to make a copy of a **Profile Switch**. See [Your AAPS Profile > Manage your profiles](#your-aaps-profile-clone-profile-switch) for more information.
 
+(AapsScreens-running-mode)=
+### Running mode
+
+![Running mode](../images/TreatmentsView6.png)
+
+This tab shows the history of [loop status](#AapsScreens-loop-status) changes : open, closed, suspend loop.
+
 ### Care portal
 
 ![Care portal](../images/TreatmentsView5.png)

diff --git a/docs/EN/Maintenance/DocumentationUpdate.md b/docs/EN/Maintenance/DocumentationUpdate.md
@@ -5,7 +5,7 @@
 - [3.4](#version3400) release and documentation update roll-up (Wizard, Computer build versions, Config Builder)
 - CGM list update. Dexcom G5, Tomato, Glimp removed.
 - [Site rotation UI](#Aapsscreens-site-rotation)
-- [Running Mode](#aaps-screens-running-mode)
+- [Running mode](#AapsScreens-running-mode)
 - [Autotune](../AdvancedOptions/Autotune.md)
 
 ## December 2025

diff --git a/docs/EN/Maintenance/ReleaseNotes.md b/docs/EN/Maintenance/ReleaseNotes.md
@@ -75,7 +75,9 @@ Release date: 31-12-2025
 
 ### New features
 * Running mode @MilosKozak
-* new CGMs
+  * Show [loop status history](#AapsScreens-running-mode) in treatment tabs
+  * Show and allow changing [loop status from AAPSClient](#RemoteControl_aapsclient).<br>NB : needs the setting [NSClient > Synchronization > Receive Running mode events](#Preferences-nsclient-synchronization)
+* [New CGMs](../Getting-Started/CompatiblesCgms.md) : Glunovo, Intelligo, Sinocare
 * [Site rotation](#Aapsscreens-site-rotation) support @Philoul
 * ability to stop SMB from UI @MilosKozak
 * Syai CGM is [trusted source](#GettingStarted-TrustedBGSource) and supports advanced filtering @MilosKozak

diff --git a/docs/EN/RemoteFeatures/RemoteControl.md b/docs/EN/RemoteFeatures/RemoteControl.md
@@ -1,10 +1,10 @@
 # Remote control of AAPS
 There are four highly effective tools for remotely managing **AAPS**:
 
-1) [SMS commands](RemoteControl_SMS-Commands) (follower phone can be either Android or iOS), 
-2) [AAPSClient](RemoteControl_aapsclient) (follower phone is Android)
-3) [Nightscout](RemoteControl_nightscout) (Android, iOS or other computer/device).  
-4) [Smartwatches](RemoteControl_smartwatches) (Android) 
+1) [SMS commands](#RemoteControl_SMS-Commands) (follower phone can be either Android or iOS), 
+2) [AAPSClient](#RemoteControl_aapsclient) (follower phone is Android)
+3) [Nightscout](#RemoteControl_nightscout) (Android, iOS or other computer/device).  
+4) [Smartwatches](#RemoteControl_smartwatches) (Android) 
 
 The first three are mostly appropriate for caregivers/parents, but smartwatches are very useful for caregivers/parents **and** for adults with diabetes themselves. 
 
@@ -21,7 +21,7 @@ See the dedicated [SMS Commands](../RemoteFeatures/SMSCommands.md) page.
 
 **AAPSClient** looks very similar in appearance to **AAPS** itself, offering the caregiver tabs that will remotely action commands in **AAPS**:
 
-![NSCLIENT_ 2024-05-17 134512](../images/6c66a27c-21d7-4c43-ac66-001669c0634f.png)
+![NSCLIENT_ 2024-05-17 134512](../images/remote_control_and_following/AAPSClient_main_view.png)
 
 ### About AAPSClient and AAPSClient2
 
@@ -100,15 +100,18 @@ If you are struggling with **AAPS** v3 to accept the 'NS access token' and using
 
 ### Features of AAPSClient include:
 
-| Tab / Hamburger     | Features                                                     |
-| ------------------- | ------------------------------------------------------------ |
-| **Action** Tab      | - Profile Switch <br>- Temp Target<br>- BG Check<br>- CGM Sensor Insert<br>- Note<br>- Exercise<br>- Announcement<br>- Question?<br>- History Browser |
-| **Food** Tab        |                                                              |
-| **Treatments** Tab  | - Check Treatments delivered including bolus and carbs entered |
-| **Maintenance** Tab | - Export and Import Settings                                 |
-| **Profile** Tab     | - Creating new profile<br>- Profile switch                   |
+| Tab / Hamburger     | Features                                                                                                                                                                       |
+| ------------------- |--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------|
+| **Action** Tab      | - Profile Switch <br>- Loop Status change <br>- Temp Target<br>- BG Check<br>- CGM Sensor Insert<br>- Note<br>- Exercise<br>- Announcement<br>- Question?<br>- History Browser |
+| **Food** Tab        |                                                                                                                                                                                |
+| **Treatments** Tab  | - Check Treatments delivered including bolus and carbs entered                                                                                                                 |
+| **Maintenance** Tab | - Export and Import Settings                                                                                                                                                   |
+| **Profile** Tab     | - Creating new profile<br>- Profile switch                                                                                                                                     |
 
 **AAPSClient** allows the caregiver to make many of the adjustments that are allowed directly in **AAPS** (excluding insulin boluses) remotely, via the mobile or internet network. The main benefits of **AAPSClient** are the speed and ease with which caregivers/parents can use it to remotely control **APPS**. __AAPSClient__ _can_ be much faster than entering SMS Commands, if delivering a command which would require authentication. Commands entered on **AAPSClient** are uploaded onto Nightscout.
+In order for the actions taken in **AAPSClient** to be actually actioned in **AAPS**, the NSClient settings must allow to receive such orders. See the [Synchronization section of NSClient preferences](#Preferences-nsclient-synchronization).
+
+
 
 Remote control through **AAPSClient** is only recommended if your synchronization is working well (_i.e._ you don’t see unwanted data changes like self-modification of TT, TBR etc) see [release notes for Version 2.8.1.1](#important-hints-2-8-1-1) for further details.
 

diff --git a/docs/EN/SettingUpAaps/Preferences.md b/docs/EN/SettingUpAaps/Preferences.md
@@ -429,8 +429,11 @@ When using NSClientV3, all uploaders must be using the API V3. Since most are no
 - Double check for typos here if you are stuck in Objective 1.
 - Leave Connect to websockets enabled (recommended).
 
+(Preferences-nsclient-synchronization)=
 ### Synchronization
 
+![Synchronization options](../images/Pref2025_NSclient_Synchronization.png)
+
 Synchronization choices will depend on the way you will want to use **AAPS**.
 
 You can select which data you want to [upload and download to or from Nightscout](#Nightscout-aaps-settings). 

diff --git a/docs/EN/images/6c66a27c-21d7-4c43-ac66-001669c0634f.png b/docs/EN/images/6c66a27c-21d7-4c43-ac66-001669c0634f.png
diff --git a/docs/EN/images/Home2020_LoopStatus.png b/docs/EN/images/Home2020_LoopStatus.png
diff --git a/docs/EN/images/Home2020_MainGraph.png b/docs/EN/images/Home2020_MainGraph.png
diff --git a/docs/EN/images/Pref2025_NSclient_Synchronization.png b/docs/EN/images/Pref2025_NSclient_Synchronization.png
diff --git a/docs/EN/images/Screens/RunningMode.png b/docs/EN/images/Screens/RunningMode.png
diff --git a/docs/EN/images/TreatmentsView1.png b/docs/EN/images/TreatmentsView1.png
diff --git a/docs/EN/images/TreatmentsView2.png b/docs/EN/images/TreatmentsView2.png
diff --git a/docs/EN/images/TreatmentsView3.png b/docs/EN/images/TreatmentsView3.png
diff --git a/docs/EN/images/TreatmentsView4.png b/docs/EN/images/TreatmentsView4.png
diff --git a/docs/EN/images/TreatmentsView5.png b/docs/EN/images/TreatmentsView5.png
diff --git a/docs/EN/images/TreatmentsView6.png b/docs/EN/images/TreatmentsView6.png
diff --git a/docs/EN/images/remote_control_and_following/AAPSClient_main_view.png b/docs/EN/images/remote_control_and_following/AAPSClient_main_view.png